Victron Quattro 48/5000/70-100/100 120-230V VE.Bus
- Quattro 48/5000/70-100/100 120V VE.Bus
- Quattro 48/5000/70-100/100 230V VE.Bus
- Quattro 48/5000/70-100/100-S 230V VE.Bus
Integrated transfer switch and two AC inputs
The Quattro 48/5000 has two AC inputs that can be activated independently of each other. This makes it possible to connect the Quattro 48/5000 to different and independent AC power sources. The Quattro 48/5000 automatically searches for and connects to the active AC power source, regardless of whether it is a generator or other power sources.
Two different AC outputs ensure an uninterruptible power supply. The main output ensures continuous power supply by switching from a normal power supply by e.g. can switch the public power grid to its own power supply. This means that a power failure is not registered by electrical devices. A second output takes over the power supply only if AC power is available at an AC input.
Parallel connection and 3-phase operation
The Quattro 48/5000 enables up to six devices to be connected in parallel. These can be switched to 3-phase operation, which generates an inverter power of 144kW / 180kVA or 2500 A charging power.
Power Control and Power Assist
The Quattro 48/5000 is able to adapt itself to the conditions of its connection point with regard to the power supply. He does this by allowing his AC inputs to limit the current. The Quattro 48/5000 thus enables other consumer sources to also receive the necessary power. This prevents overloading the power grid.
The Power Control enables the Quattro 48/5000 to bridge other power sources that are too weak. For example, if the current of a generator is too weak, the Quattro 48/5000 will step in. If this generator is then switched off, the Quattro 48/5000 uses this current again to charge the batteries.
Configuration, control and monitoring
All settings can be changed in a few minutes. The software can be configured very quickly. The function can be monitored both at the location and at other locations. This is done on site, for example, using a smart phone, tablet or a multi control panel. For remote monitoring, data can be viewed and stored free of charge on the Victron Remote Management website.
S-stands for silent. The device is a little higher. 500mm instead of 444mm.