Phoenix Inverter 48/5000 230V Smart

Phoenix Inverter Smart 48V 1600 VA to 5000 VA

• Phoenix Inverter 48/1600 230V Smart
• Phoenix Inverter 48/2000 230V Smart
• Phoenix Inverter 48/3000 230V Smart
• Phoenix Inverter 48/5000 230V Smart

The Phoenix 48V impresses in many respects. Here is an overview of some key data:

• Low battery voltage alarm
• Threshold values for shutdown and restart at low battery voltage levels.
• Dynamic cut-off: load-dependent shutdown threshold
• Output voltage: 210 - 245V
• Frequency: 50 Hz or 60 Hz
• Threshold for ECO mode on/off and ECO mode sensor
• Alarm relay
• Input and output voltage, load and alarm

VE.Direct communication port

Since the 48V can be easily connected to a computer or laptop, monitoring and configuration are child's play.

Proven reliability

By using a toroidal transformer, the reliability of the 48V has been further increased. The device is protected against both short circuits and overheating of any kind.

High starting power

This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools.

ECO mode

In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on briefly every 2.5 seconds (adjustable). If the load exceeds the preset threshold during this, the inverter remains switched on.

Remote on/off switching

A remote on/off switch or a relay contact can be connected to the two-pole connector. Alternatively, terminal H (left) of the two-pole connector can be connected to a battery positive terminal, or terminal L (right) of the two-pole connector to the battery negative terminal (or, for example, to a vehicle's chassis).

Datasheet

Manual

Wiring diagram