GoodWe Hybrid High Voltage Inverters from the ET Plus Series with 5kW - 10kW
The ET Plus series replaces the old ET series.
With the high-voltage battery connection and 2 independent MPP trackers, the GoodWe inverter leaves nothing to be desired.
This device is currently configured via the GoodWe PV Master App and sends its data via the integrated WiFi interface to the free GoodWe SEMS portal.
The package includes a three-phase smart meter with split-core current transformers.
Larger system designs are possible through the cascade operation of multiple ET devices.
Thanks to the wide battery voltage range of 180V to 550V, this device offers flexible compatibility with several lithium battery systems on the market.
The incoming PV generator power can be up to 30% higher than the rated power, resulting in better energy yield on very hot and very cold days.
The built-in UPS (emergency power) function allows switching within 10 milliseconds in case of a power outage to ensure uninterrupted power supply to connected loads.
The inverter also has an open battery management interface, meeting the requirements of some energy providers.
Product Advantages
- Status LED
- AC charging capability, expandable via the SDT G2 series, among others
- High efficiency of up to 98.2%
- Integrated DC SPD Type 2
- Direct connection to ripple control receiver
- AC overvoltage protection
- Cascade operation of multiple ET devices possible with SEC1000S Hybrid Combiner Box!
GoodWe Lynx Home F High Voltage Storage
With the Lynx Home F, GoodWe introduces a new storage series to the market and expands the existing portfolio with a high-voltage variant.
The new GoodWe high-voltage storage Lynx Home F is stackable and consists of a control center (Power Control Unit (PCU)), battery modules of 3.27kWh each, and a base.
The size varies between 2 and 5 battery modules, with a usable storage capacity ranging from 6.6 to 16.4 kWh.
Compatibility
The Lynx Home F series is compatible with the ET series (3-phase hybrid inverters), the EH series (1-phase hybrid inverters), as well as the battery inverters of the BH series (1-phase) and BT series (3-phase).
Possible System Connections for the GoodWe High-Voltage Storage
The high-voltage system consisting of 2-5 battery towers can be combined with the GoodWe ET Plus series.
The ET Plus series has a battery voltage range of 600 Vmax.
A tower with 5 battery modules has an operating voltage range of 456-576 V, making it compatible with the ET Plus series.
The same applies to the BT series.
The inverters of the GoodWe EH series (1-phase) can be connected to a battery tower with a maximum of 4 battery modules from the GoodWe high-voltage storage.
The battery voltage range of the EH series is 460 Vmax.
For the Lynx Home F with 4 battery modules, the battery voltage range is 365-461 V, which matches the EH series.
The same applies to the BH series.
Commissioning
GoodWe's high-voltage storage is installed via plug-and-play without additional parameterization of the individual battery modules.
The battery modules have built-in handles for stacking.
Each module weighs 43 kg.
There is no need for additional cabling between the modules.
To establish communication, the existing communication cable (BMS cable) of the GoodWe inverter is directly connected to the PCU.
The battery cable (diameter: 6 mm²) is used for power transmission between the inverter and PCU.
An additional PE cable is required for grounding the battery and inverter, and it is not included in the package.
Everything is then commissioned via the GoodWe PV Master App.
The GoodWe high-voltage battery can be used for emergency and backup power.
Product and performance warranty of 10 years.
Delivery time approx.:
1 - 2 Workdays
(DE - int. shipments may differ)
