2,500 Wp Full Black PV Storage Set with Anker SOLIX Solarbank 3 Pro | 5× 500 Wp Bifacial | Backup Power | up to 16 kWh

2,500 Wp Full Black PV Storage Set with Anker SOLIX Solarbank 3 Pro

The 2,500 Wp PV storage set offers the highest module output among our balcony power plant sets. Five bifacial glass-glass modules from Sunpro, each rated at 500 Wp, together deliver 2,500 Wp – combined with the Anker SOLIX Solarbank 3 E2700 Pro for maximum self-consumption. New in the set: the Anker SOLIX Smart Meter Gen 2.

Important registration notice: With a module output of 2,500 Wp, this set exceeds the 2,000 Wp threshold for plug-in solar devices exempt from registration. This set must be registered with your grid operator. A free entry in the German Market Master Data Register (Marktstammdatenregister, MaStR) is also required – this can be completed online in just a few minutes.

Storage, Inverter & Backup Power in One Device

The Anker SOLIX Solarbank 3 E2700 Pro stores surplus midday solar power for use in the evening – with a 2.7 kWh LiFePO4 battery (IP65, long-lasting and weatherproof). Controlled by the included Smart Meter Gen 2, it automatically adjusts its output to match actual household consumption. In the event of a power outage, the off-grid output keeps connected devices running – such as a router, lighting, or a refrigerator.

New in the Set: Anker SOLIX Smart Meter Gen 2

Included in the scope of delivery is the Anker SOLIX Smart Meter Gen 2 (AE1X0311, three-phase) – the current meter generation, not the previous one. It measures household consumption on all three phases in real time and reports the values to the Solarbank, which adjusts its output within around 3 seconds. Especially with a module output of 2,500 Wp, this control loop determines how much of the midday surplus actually stays in the house.

Compared to the first generation, the Gen 2 is around 50% slimmer at just 19 mm in height, so it also fits into already tightly packed meter cabinets. Wiring is done via tool-free Weidmüller SNAP-IN terminals, with connectivity via Wi-Fi, Bluetooth, or RS-485. Accuracy class 1, approx. 2 W self-consumption, current transformers with 63 A or 120 A opening. Mounted on a 35 mm DIN rail.

Installation notice: The Smart Meter is installed in the fuse box or meter cabinet. Under VDE regulations and § 13 NAV (German low-voltage connection ordinance), this work may only be carried out by a qualified electrician.

Expandable up to 16.1 kWh

The storage system grows with your needs: with the Anker SOLIX BP2700 expansion battery, capacity can be scaled tool-free from 2.7 kWh up to 16.1 kWh. With 2,500 Wp of module output, adding at least one expansion battery is worthwhile so that the midday surplus stays in the house as fully as possible.

Bifacial Glass-Glass Modules with 500 Wp

The Sunpro SPDG500-N120R10 modules use N-type TOPCon cells and achieve an efficiency of 22.55%. Two 2 mm-thick glass panes permanently protect the cells against micro-cracks, moisture, and UV exposure – tested for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. Thanks to the transparent back sheet, the modules also capture light reflected from the surface below, delivering up to 15% additional yield depending on installation. A black frame and dark front blend discreetly into a facade or balcony railing. Sunpro provides a 25-year product warranty and a 30-year linear performance warranty, guaranteeing at least 87.4% of rated output after 30 years.

Distributed Across Four MPP Trackers

The Solarbank 3 Pro can accept up to 3,600 W of solar input and has four MPP trackers (32 A, 16–60 V each). With five modules, three are wired individually and two share one input in parallel – voltage and current stay clearly within the specified limits.

Important: Choose a Mounting System Separately

A mounting system is not included in this set. The modules measure 1,955 × 1,134 mm and weigh 26.5 kg each. For square/rectangular railings up to 80 mm, we recommend the NuaSol balcony mount for square railings; for round railings, the NuaSol balcony mount for round railings. For flat roofs, terraces, or gardens, the NuaSol ground mount with 30°–60° tilt is available. Each mount holds two modules – so three mounts are needed for this set.