K2 Systems MiniRail 2.0 for Trapezoidal Sheet Metal | 4 Screws Included

K2 MiniRail MK2

We can only order this K2 Systems product for you from a minimum order value of 500 euros net (sum of all K2 products). Unfortunately, we must cancel K2 Systems orders with a smaller order value.

Update for the K2 trapezoidal sheet-metal system: now with MK2 rail channel

Short rail for mounting solar modules on trapezoidal sheet-metal roofs.
Includes thread-forming screws with sealing washer, 6x25 mm.
Material: aluminium EN AW-6063 T66, EPDM, stainless steel A2
Length: 0.385 m

You will also need the universal mid and end clamps.

Advantages of the MiniRail system

The K2 Systems MiniRail mounting system for PV systems was specifically developed for trapezoidal sheet-metal roofs. It stands out through its simplicity and versatility. The small number of components allows for an easy and quick change of module orientation.

• The innovative short-rail system is structurally optimised. Installation is fast and easy.
• Universal module clamping and module orientation: the universal module clamp can be rotated by 90°, which enables landscape and portrait mounting on a grid pattern.
• 5° elevation with MiniFive: this results in higher yield through the optimised angle of incidence and improved rear ventilation.
• The mounting system is optimised for storage and transport, giving you high planning reliability.

Technical data: MiniRail system

Application range: pitched roofs with trapezoidal sheet metal or sandwich panels, roof pitch: 5°-75°

Module orientation: horizontal or vertical

Material: aluminium (EN AW-6063 T66 / EN AW-6082 T6); EPDM

MiniRail dimensions: 385 mm long x 85 mm wide x 31 mm high

Fastening: screwed into the roof covering with thread-forming thin-sheet screws

Elevation with MiniFive: approx. 5°

Requirements:

• Sheet thickness: ≥ 0.5 mm (steel and aluminium)
• Sandwich panels: manufacturer approval required
• Flat bearing surface around the drill hole: Ø ≥ 20mm
• Module frame height: 30-50mm
• Rib width: at least 22mm (project-specific minimum dimension given in the Base On report)
• Rib spacing: 101-350mm depending on rib width

K2 Base: plan your mounting system online

With the free online software K2 Base you can conveniently plan your mounting system online. The software is always up to date and can be used platform-independently via your internet browser.

The planning basis is satellite imagery from Google Maps. You also have access to graphical drawing tools for roofs and module areas, as well as precise load and ballast planning. At the end, you receive a project plan as a PDF, which includes, among other things, the project data, the mounting plan, the parts list and the structural verification.

As our customer, you can simply enter "inutec solarcenter" under "Company" when registering with Base.

Downloads - K2 Systems mounting system for trapezoidal sheet metal

Data sheet - MiniRail system (PDF, 601 KB)

Current installation instructions at K2 Systems