K2 Systems D-Dome 6.10 Base Set | East-West Flat-Roof Mounting System | for Module Widths 960 to 1170 mm

We can only order this K2 Systems product for you from a minimum order value of 500 euros net (total of all K2 products). Unfortunately, we must cancel K2 Systems orders with a lower merchandise value.

Planning: Plan the structural design and ballasting using K2 Base – see our page PV roof calculation for the mounting substructure.

The K2 D-Dome 6.10 Base Set is the pre-assembled base unit of the K2 Dome 6 flat-roof system in an east-west orientation (double-sided, approx. 10°). It is ballasted and laid on the flat roof – without penetrating the roof.

• For east-west flat-roof mounting (D-Dome 6.10, double-sided, approx. 10°)
• Pre-assembled, including BasicRail 2.48 m, 2× Dome 6.10 SD, 2× EndPlate and 3× Dome Mat S
• For module widths 960–1170 mm, module lengths 1448–2390 mm, frame height 30–50 mm
• Ballasted installation without roof penetration; approx. 3.1 kg per set

K2 item number: 2003620.

Note: Peak, DomeClamp, connectors, ballast trays and – for pitches ≥ 3° – Dome FixPro must be selected separately (the same parts as for the S-Dome).