GoodWe Lynx Home F high-voltage battery
The new GoodWe high-voltage storage unit Lynx Home F is stackable and consists of a control center (power control unit (PCU)), battery modules of 3.27 kWh each and a base.
The size varies between 2 and 5 battery modules, the usable storage capacity is 6.6 to 16.4 kWh
The brain of the battery - PCU control system
The PCU is the control center of the battery.
It weighs 25 kg and has an LED display that visualizes the charging status and error messages.
The PCU has an integrated master battery management system (BMS).
It records the communication of the individual battery modules in the battery tower and records the data.
The integrated disconnect device can interrupt the circuit to the inverter if necessary.
The PCU is prepared in such a way that you could connect several batteries.
This is expected to be possible in the summer of 2022.
Installation
The high-voltage battery from GoodWe is installed via plug-and-play without additional parameterization of the individual battery modules.
The battery modules have built-in handles that are used to stack the modules.
A module weighs 43 kg.
Additional cabling between the modules is not necessary.
In order to establish communication, the existing communication cable (BMS cable) of the GoodWe inverter must be connected directly to the PCU.
The battery cable (diameter: 6 mm²) is used for the power transmission between the inverter and the PCU.
A PE cable is also required for grounding the battery and the inverter, it is not included in the scope of delivery.
Everything is then put into operation via the GoodWe PV Master App.
The GoodWe high-voltage battery can be used for emergency and backup power.
Product and performance guarantee of 10 years.
Video
