SmartSolar MPPT RS 450/200-Tr

    Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller

    The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV

    input and either 100A, or 200A output. It is used in on-grid and off-grid solar

    applications where maximum battery charging power is required.

    Connection_RS450-Inutec 

    System example diagram
    The 100A MPPT RS combined with a GX device, charging a 48V
    battery with 2 separate solar PV strings.

     

    Multiple independent MPPT tracking inputs

    With multiple MPPT trackers, you can optimize your solar panel design for

    maximum performance for your specific location.    

     

    Isolated PV connections for additional safety 

    Full galvanic isolation between PV and battery connections provide additional

    overall system safety.  

     

    Wide MPPT voltage range

    80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.  

     

    Light weight, efficient and quiet

    Thanks to high frequency technology and a new design this powerful charger

    weighs only 7.9 kg for the 100A model. In addition to this it has an excellent

    efficiency, low standby power, and a very quiet operation.   

     

    Display and Bluetooth

    The display reads battery, and controller

    parameters. The parameters can be accessed

    with a smartphone or other Bluetooth enabled

    device. In addition, Bluetooth can be used to

    set up the system and to change settings with VictronConnect.  

     

    PV Isolation resistance monitoring for peace of mind at higher voltages

    The MPPT RS continuously monitors the PV array and can detect if there are

    faults that reduce the isolation of the panels to unsafe levels. 

     

    VE.Can and VE.Direct port

    For connection to a GX device for system monitoring, data logging, and remote

    firmware updates. VE.Can allows for up to 25 units to be connected together in

    parallel and synchronize their charging.  

     

    I/O Connections

    Programmable Relay, temperature sensor, auxiliary, digital input and voltage

    sensor connections. The remote input can accept the Victron smallBMS, and

    other BMS with allow-to-charge signal. 

     

    Configure and monitor with VictronConnect

    The built-in Smart Bluetooth connection allows for

    quick monitoring and settings adjustment.  

     

    The built in 30 day history shows individual

    performance of the separate MPPT trackers.   

     

    Try the VictronConnect demo to see the full range

    of configuration and display options with sample

    data.

    Monitoring-RS450-Inutec

    VRM Portal
    When the MPPT RS is connected to a GX device with internet
    connection, or the GlobalLink 520 with built in 4G connectivity, you
    can access our free remote monitoring website (VRM). This will display
    all your system data in a comprehensive graphical format. Alarms can
    be received by e-mail.

     

    Datasheet

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt.

    Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

SmartSolar MPPT RS 450/200-Tr

Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller

The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV

input and either 100A, or 200A output. It is used in on-grid and off-grid solar

applications where maximum battery charging power is required.

Connection_RS450-Inutec 

System example diagram
The 100A MPPT RS combined with a GX device, charging a 48V
battery with 2 separate solar PV strings.

 

Multiple independent MPPT tracking inputs

With multiple MPPT trackers, you can optimize your solar panel design for

maximum performance for your specific location.    

 

Isolated PV connections for additional safety 

Full galvanic isolation between PV and battery connections provide additional

overall system safety.  

 

Wide MPPT voltage range

80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.  

 

Light weight, efficient and quiet

Thanks to high frequency technology and a new design this powerful charger

weighs only 7.9 kg for the 100A model. In addition to this it has an excellent

efficiency, low standby power, and a very quiet operation.   

 

Display and Bluetooth

The display reads battery, and controller

parameters. The parameters can be accessed

with a smartphone or other Bluetooth enabled

device. In addition, Bluetooth can be used to

set up the system and to change settings with VictronConnect.  

 

PV Isolation resistance monitoring for peace of mind at higher voltages

The MPPT RS continuously monitors the PV array and can detect if there are

faults that reduce the isolation of the panels to unsafe levels. 

 

VE.Can and VE.Direct port

For connection to a GX device for system monitoring, data logging, and remote

firmware updates. VE.Can allows for up to 25 units to be connected together in

parallel and synchronize their charging.  

 

I/O Connections

Programmable Relay, temperature sensor, auxiliary, digital input and voltage

sensor connections. The remote input can accept the Victron smallBMS, and

other BMS with allow-to-charge signal. 

 

Configure and monitor with VictronConnect

The built-in Smart Bluetooth connection allows for

quick monitoring and settings adjustment.  

 

The built in 30 day history shows individual

performance of the separate MPPT trackers.   

 

Try the VictronConnect demo to see the full range

of configuration and display options with sample

data.

Monitoring-RS450-Inutec

VRM Portal
When the MPPT RS is connected to a GX device with internet
connection, or the GlobalLink 520 with built in 4G connectivity, you
can access our free remote monitoring website (VRM). This will display
all your system data in a comprehensive graphical format. Alarms can
be received by e-mail.

 

Datasheet

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Victron Energy SmartSolar MPPT RS 450/200-Tr

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series-connected PV arrays that charge 48 VDC battery banks.
SmartSolar MPPT RS 450/200-Tr
SmartSolar MPPT RS 450/200-Tr €1.785,00
Delivery time 1-3 days
1-3 days You have got: counting... hours
* Excl. tax Excl. Shipping costs

    SmartSolar MPPT RS 450/200-Tr

    Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller

    The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV

    input and either 100A, or 200A output. It is used in on-grid and off-grid solar

    applications where maximum battery charging power is required.

    Connection_RS450-Inutec 

    System example diagram
    The 100A MPPT RS combined with a GX device, charging a 48V
    battery with 2 separate solar PV strings.

     

    Multiple independent MPPT tracking inputs

    With multiple MPPT trackers, you can optimize your solar panel design for

    maximum performance for your specific location.    

     

    Isolated PV connections for additional safety 

    Full galvanic isolation between PV and battery connections provide additional

    overall system safety.  

     

    Wide MPPT voltage range

    80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.  

     

    Light weight, efficient and quiet

    Thanks to high frequency technology and a new design this powerful charger

    weighs only 7.9 kg for the 100A model. In addition to this it has an excellent

    efficiency, low standby power, and a very quiet operation.   

     

    Display and Bluetooth

    The display reads battery, and controller

    parameters. The parameters can be accessed

    with a smartphone or other Bluetooth enabled

    device. In addition, Bluetooth can be used to

    set up the system and to change settings with VictronConnect.  

     

    PV Isolation resistance monitoring for peace of mind at higher voltages

    The MPPT RS continuously monitors the PV array and can detect if there are

    faults that reduce the isolation of the panels to unsafe levels. 

     

    VE.Can and VE.Direct port

    For connection to a GX device for system monitoring, data logging, and remote

    firmware updates. VE.Can allows for up to 25 units to be connected together in

    parallel and synchronize their charging.  

     

    I/O Connections

    Programmable Relay, temperature sensor, auxiliary, digital input and voltage

    sensor connections. The remote input can accept the Victron smallBMS, and

    other BMS with allow-to-charge signal. 

     

    Configure and monitor with VictronConnect

    The built-in Smart Bluetooth connection allows for

    quick monitoring and settings adjustment.  

     

    The built in 30 day history shows individual

    performance of the separate MPPT trackers.   

     

    Try the VictronConnect demo to see the full range

    of configuration and display options with sample

    data.

    Monitoring-RS450-Inutec

    VRM Portal
    When the MPPT RS is connected to a GX device with internet
    connection, or the GlobalLink 520 with built in 4G connectivity, you
    can access our free remote monitoring website (VRM). This will display
    all your system data in a comprehensive graphical format. Alarms can
    be received by e-mail.

     

    Datasheet

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

SmartSolar MPPT RS 450/200-Tr

Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller

The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV

input and either 100A, or 200A output. It is used in on-grid and off-grid solar

applications where maximum battery charging power is required.

Connection_RS450-Inutec 

System example diagram
The 100A MPPT RS combined with a GX device, charging a 48V
battery with 2 separate solar PV strings.

 

Multiple independent MPPT tracking inputs

With multiple MPPT trackers, you can optimize your solar panel design for

maximum performance for your specific location.    

 

Isolated PV connections for additional safety 

Full galvanic isolation between PV and battery connections provide additional

overall system safety.  

 

Wide MPPT voltage range

80 – 450 VDC PV operating range, with a 120VDC PV startup voltage.  

 

Light weight, efficient and quiet

Thanks to high frequency technology and a new design this powerful charger

weighs only 7.9 kg for the 100A model. In addition to this it has an excellent

efficiency, low standby power, and a very quiet operation.   

 

Display and Bluetooth

The display reads battery, and controller

parameters. The parameters can be accessed

with a smartphone or other Bluetooth enabled

device. In addition, Bluetooth can be used to

set up the system and to change settings with VictronConnect.  

 

PV Isolation resistance monitoring for peace of mind at higher voltages

The MPPT RS continuously monitors the PV array and can detect if there are

faults that reduce the isolation of the panels to unsafe levels. 

 

VE.Can and VE.Direct port

For connection to a GX device for system monitoring, data logging, and remote

firmware updates. VE.Can allows for up to 25 units to be connected together in

parallel and synchronize their charging.  

 

I/O Connections

Programmable Relay, temperature sensor, auxiliary, digital input and voltage

sensor connections. The remote input can accept the Victron smallBMS, and

other BMS with allow-to-charge signal. 

 

Configure and monitor with VictronConnect

The built-in Smart Bluetooth connection allows for

quick monitoring and settings adjustment.  

 

The built in 30 day history shows individual

performance of the separate MPPT trackers.   

 

Try the VictronConnect demo to see the full range

of configuration and display options with sample

data.

Monitoring-RS450-Inutec

VRM Portal
When the MPPT RS is connected to a GX device with internet
connection, or the GlobalLink 520 with built in 4G connectivity, you
can access our free remote monitoring website (VRM). This will display
all your system data in a comprehensive graphical format. Alarms can
be received by e-mail.

 

Datasheet

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »