Phoenix Wechselrichter Smart 48V 1600 VA to 5000 VA

• Phoenix Inverter 48/1600 230V Smart
•  Phoenix Inverter 48/2000 230V Smart
• Phoenix Inverter 48/3000 230V Smart
• Phoenix Inverter 48/5000 230V Smart

**Free shipping** with code: Victron

The Phoenix 48V convinces in many ways. Some data at a glance:

• Low battery alarm
• Threshold values ​​for switching off and restarting at low battery voltage values.
• Dynamic shutdown: load-dependent shutdown threshold
• Output voltage: 210 - 245V
• Frequency: 50 Hz or 60 Hz
• Threshold value for ECO mode on / off and ECO mode sensor
• Alarm relay
• Input and output voltage, load and alarms

VE.Direct communication port

Since the 48V can be easily connected to a computer or laptop, monitoring and configuration is child's play.

Proven reliability

By installing a ring transformer, the reliability of the 48V has increased again. The device is protected against both short circuits and overheating of any kind.

High switch-on power

This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools.

Eco mode

In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold value, the inverter remains switched on.

Remote on / off switch

A remote-controlled on / off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (left) of the two-pole plug can be connected to a battery positive pole or connection L (right) of the two-pole plug can be switched to the battery negative pole (or, for example, to the body of a vehicle).

Datasheet

manual

Schematic