Victron Energy MultiPlus-II 48/5000/70-50 230V - Inverter / Charger
MultiPlus-II 48/5000/70-50 230V - Inverter / Charger
Victron Energy MultiPlus-II 48V 5000VA 70-50 230V
The MultiPlus-II 48/5000 / 70-50 230V from Victron Energy is an inverter / charger with all features of the MultiPlus. The device also has the option of an external current transformer to implement the functions PowerControl and PowerAssist. It also offers all the features of the MultiGrid with built-in anti-islanding and a growing list of countries in which it is approved.
The MultiPlus-II is flexible and can be used with both off-grid and grid-connected PV systems as well as with other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters
PowerAssist: The Victron MultiPlus 2 prevents overloading of limited AC sources, such as a generator or shore power connection. First, the charging process of the battery is automatically reduced to protect against overload. After that, the output of a generator or shore side supply is boosted with power from the battery. When AC sources are switched off, the energy that is now available can be used to recharge the batteries.
PowerControl: You can set a maximum grid or generator current. The MultiPlus-II pays attention to other connected AC loads and uses only whatever is extra to charge the battery. This protects the generator or grid against overload.
Uninterrupted AC Power
In the event of a grid failure or an interruption in the shore or generator power, the inverter within the Victron MultiPlus-II is automatically activated to ensure that all connected loads are supplied with power. The switchover is so quick that electronic devices continue to operate without disruption.
Parallel and Three Phase Operation
Up to six Multis can operate in parallel to achieve higher power output. With six 48/5000/70 units, for example, this results in 25 kW / 30 kVA output power with 420 Amps charging capacity.
In addition to the parallel connection, three units of the same model can be configured for three-phase output.
But there is still more: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.
Remote Monitoring and Control, Anywhere Anytime
You can monitor, control and adjust settings of your MultiPlus 2 and your system not only on-site via LAN, but also worldwide via the Internet with the free VRM app and the VRM (Victron Remote Management) portal. Access is via smartphone, tablet, notebook or PC. You also have the option of connecting the device to a Victron Energy Color Control GX or Victron Energy Venus GX, for example, in order to change settings or have a backup generator start automatically.
Downloads - Victron MultiPlus-II Inverter / Charger
Datasheet (PDF, 618 KB)
Search words: MultiPlus II, MultiplusII, Multi II, Multi Plus 2, MultiPlus 2, Multi 2, Multi, MP2, MP 2, MP