SolarEdge 1ph storage hybrid inverter packages with 10kWh HV battery and 2 to 5 kW SE2200-5000H HD Wave inverter
1ph storage hybrid inverter packages with 10kWh HV battery and 2 to 5 kW SE2200-5000H HD Wave inverter€9.120,00
Do you have a question about this product?
Our employee is happy to help you find the right product
Ask a question about this product
Your question has been sent
We will get back to you as soon as possible with the correct answer.
- Net capacity: 9.7 kWh (at 100% DoD)
- Gross capacity: 10.3 kWh
- Rated power: 5KW
- Guarantee: 10 years
- Compatibility: Single-phase inverters with HD-Wave Technology, StorEdge single-phase inverters with HD-Wave Technology
- Communication: Wireless connection via SolarEdge Home network plug-in
- Weight: 121kg
- Dimensions: 790 x 1179 x 250mm
- Protection class: IP 55
- Installation: Inside or outside possible. Wall mounting with handles or floor mounting with base plate possible (must be ordered separately)
- Power: 2.2kVa, 3kVa, 3.7kVa, 4kVa, 5kVa - 1 phase
- 2 pairs of MC4 inputs
- Interfaces: Ethernet RJ45, RS485
- Protection class: IP65
- Standard warranty: 12 years
- Dimensions: 280 x 370 x 142 mm (H x W x D)
- Weight: 10kg
- Guarantee: 12 years
- High measurement accuracy (up to 0.5%) for production consumption monitoring
- Provides counter values to the inverter for feed-in control
- Small and easy to install - fits in any meter cabinet
- Supports rooftop systems, commercial systems and large-scale PV systems
- Integrated bus termination
- 230V / 400V
- Current transformer input 333 mV
- For SolarEdge current transformers 50 A to 3000 A (to be ordered as an option)
- RS485 Modbus
- Response time <200ms
- Dimensions: 75 x 139 x 35mm (H x W x D)
- Wall mounting or DIN rail
- Noble and compact design
- Easy and quick installation
- Floor or wall mounting of the home battery high voltage possible
- Storage and inverter from one manufacturer
- Visualization and control of the photovoltaic system via the SolarEdge energy management system
Solaredge 1ph storage hybrid inverter packages with 10kWh HV battery and 2 to 5 kW SE2200-5000H HD Wave inverter
This set contains:
1x Energy Bank 10kWh Battery
1x SEH(2200-5000) HD-Wave with SetApp
1x SE-MTR-3Y-400V-A 3 PH 230/400V yield counter, DIN-Rail/Modbus
3x SECT-SPL-100A-A 100A current sensor for yield counter
The item ENET-HBCL-01 is also required to connect the set***
A standard DB PV1-F solar cable can be used for the additionally required power cable (4 to 6mm²).
SolarEdge completes its range with the new battery storage system, the Home Battery High Voltage. Combined with the 1-phase HD-Wave inverters, this makes for excellent system performance, as the components are perfectly matched.
Communication is handled by the new SolarEdge Home network.
SolarEdge Energy Bank 10 kWh high-voltage storage
With the SolarEdge Energy Bank, SolarEdge delivers the next building block for your complete solution.
The Energy Bank is compatible with SolarEdge high-voltage inverters with HD-Wave technology. Thanks to the SolarEdge system, you benefit from a simple "plug-and-play" installation and have a single, competent contact person in the event of service.
Thanks to the size of almost 10 kWh net capacity, this battery fits into every household and often offers a small reserve to optimize self-consumption when charging electrically or with a heat pump.
In the case of higher consumption, up to 3 batteries can be operated in parallel on one inverter.
Product features Home battery high voltage
Product Features SolarEdge SEH HD Wave hybrid inverter
SolarEdge energy meter with Modbus connection for current transducers
Current transformers must be ordered separately for each phase.