Q.Cells Montage Systeme

    Several mounting systems are available from Q.Cells for different applications on roofs

    • Q.Mount for pitches roofs
    • Q.Cell G4
    • Q.Cell G5 for flatroofs

    Only two general preparations are necessary for the detailled preparations for assembling the Q.Cells System G5. The assembly is done in just four steps with little effort

    Preparation Step 1

    1.1 Planning of the system with Q.Cells Rooftop Planner
    1.2 Mounting plan for the solar modules
    1.3 Connection Plan for the modules
    1.4 Selection of the Inverter according to the project
    1.5 Cable layout
    1.6 Plan and design of the additional ballast

     

    Preparation step 2

    2.1 Prparing the documentation
    2.2 Report of the structural design in consideration of the loads of winfd and snow
    2.3 Profatibility calculation
    2.4 Bill of material

     

    Simple and easy mounting of Q.Cells G5 mounting system

    The Q.Cell G5 System is easily erected on a suitable flat roof.

     

    Step 1

    The pre-assembled basic profiles (including building protection mat and central support) are laid out on the roof and the central supports is simply unfolded. The hinge of the folding mechanism is fixed in the end position by applying slight pressure. Fastening to the roof is not necessary, which protects the building fabric and significantly reduces installation costs.

    Step 2

    The basic profiles are aligned on the roof and the ballast carriers are attached. The ballast can already be placed according to the ballast plan.

    Step 3

    The Q CELLS solar modules are only pushed into the central support and placed in the end clamp without having to be attached with a clamp.
    During this work step, the convenient cabling can be carried out using the optional cable clips.
    The solar module is lowered downwards into the end position.

     

    Step 4

    The end clamp plate is put on and screwed tight.
    This unique assembly design not only minimizes the installation time, but also reduces the mechanical stress on the solar modules thanks to the floating mounting.
    With the fixation of an end clamp, two adjacent modules are attached at the same time - another time saving.

     

    Setvariants of the mounting material set Q.Flat G5 for Q.Cells modules G5 / G6 / G7 /G8

     

    Set 1

    For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for foiled roofs

    Components

    • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat with aluminum lamination for foil roof

    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm

    • Q.Flat-G5 end clamp klemme pre-assembled

    Set 2

    For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for bitumen roofs

    Components

    • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat without aluminum lamination for bitumen roofs
    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm
    • Q.Flat-G5 end clamp pre-assembled

    Set 3

    For Q.Peak DUO-G5 and Q.Peak DUO-G7 with 120 half cells for foiled roofs

    Components

    • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat with aluminum lamination for foil roof
    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1638mm
    • Q.Flat-G5 end clamp pre-assembled

    Set 4

    Für Q.Peak DUO-G5 und Q.Peak DUO-G7 mit 120 Halbzellen für bitumen roofs

    Components

    • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat without aluminum lamination for bitumen roofs
    • Q.Flat-G5 ballast carrier DUO (G4/G5/G7), 1638mm
    • Q.Flat-G5 end clamp pre-assembled

     

    Download

    PDF Logo  Download instruction for installation

     

     

     

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt.

    Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Q.Cells Montage Systeme

Several mounting systems are available from Q.Cells for different applications on roofs

  • Q.Mount for pitches roofs
  • Q.Cell G4
  • Q.Cell G5 for flatroofs

Only two general preparations are necessary for the detailled preparations for assembling the Q.Cells System G5. The assembly is done in just four steps with little effort

Preparation Step 1

1.1 Planning of the system with Q.Cells Rooftop Planner
1.2 Mounting plan for the solar modules
1.3 Connection Plan for the modules
1.4 Selection of the Inverter according to the project
1.5 Cable layout
1.6 Plan and design of the additional ballast

 

Preparation step 2

2.1 Prparing the documentation
2.2 Report of the structural design in consideration of the loads of winfd and snow
2.3 Profatibility calculation
2.4 Bill of material

 

Simple and easy mounting of Q.Cells G5 mounting system

The Q.Cell G5 System is easily erected on a suitable flat roof.

 

Step 1

The pre-assembled basic profiles (including building protection mat and central support) are laid out on the roof and the central supports is simply unfolded. The hinge of the folding mechanism is fixed in the end position by applying slight pressure. Fastening to the roof is not necessary, which protects the building fabric and significantly reduces installation costs.

Step 2

The basic profiles are aligned on the roof and the ballast carriers are attached. The ballast can already be placed according to the ballast plan.

Step 3

The Q CELLS solar modules are only pushed into the central support and placed in the end clamp without having to be attached with a clamp.
During this work step, the convenient cabling can be carried out using the optional cable clips.
The solar module is lowered downwards into the end position.

 

Step 4

The end clamp plate is put on and screwed tight.
This unique assembly design not only minimizes the installation time, but also reduces the mechanical stress on the solar modules thanks to the floating mounting.
With the fixation of an end clamp, two adjacent modules are attached at the same time - another time saving.

 

Setvariants of the mounting material set Q.Flat G5 for Q.Cells modules G5 / G6 / G7 /G8

 

Set 1

For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for foiled roofs

Components

  • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat with aluminum lamination for foil roof

  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm

  • Q.Flat-G5 end clamp klemme pre-assembled

Set 2

For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for bitumen roofs

Components

  • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat without aluminum lamination for bitumen roofs
  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm
  • Q.Flat-G5 end clamp pre-assembled

Set 3

For Q.Peak DUO-G5 and Q.Peak DUO-G7 with 120 half cells for foiled roofs

Components

  • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat with aluminum lamination for foil roof
  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1638mm
  • Q.Flat-G5 end clamp pre-assembled

Set 4

Für Q.Peak DUO-G5 und Q.Peak DUO-G7 mit 120 Halbzellen für bitumen roofs

Components

  • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat without aluminum lamination for bitumen roofs
  • Q.Flat-G5 ballast carrier DUO (G4/G5/G7), 1638mm
  • Q.Flat-G5 end clamp pre-assembled

 

Download

PDF Logo  Download instruction for installation

 

 

 

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Q CELLS Q.FLAT-G5 - Mounting Solution for solar modules on flat roofs

Q.FLAT-G5 - mounting solution for solar modules of the model series G4 / G5 / G6 / G7 G8 on flat roofs with a foil substrate or bitumen ceiling
  • Buy 10 for €43,38 each and save 10%

    Q.Cells Montage Systeme

    Several mounting systems are available from Q.Cells for different applications on roofs

    • Q.Mount for pitches roofs
    • Q.Cell G4
    • Q.Cell G5 for flatroofs

    Only two general preparations are necessary for the detailled preparations for assembling the Q.Cells System G5. The assembly is done in just four steps with little effort

    Preparation Step 1

    1.1 Planning of the system with Q.Cells Rooftop Planner
    1.2 Mounting plan for the solar modules
    1.3 Connection Plan for the modules
    1.4 Selection of the Inverter according to the project
    1.5 Cable layout
    1.6 Plan and design of the additional ballast

     

    Preparation step 2

    2.1 Prparing the documentation
    2.2 Report of the structural design in consideration of the loads of winfd and snow
    2.3 Profatibility calculation
    2.4 Bill of material

     

    Simple and easy mounting of Q.Cells G5 mounting system

    The Q.Cell G5 System is easily erected on a suitable flat roof.

     

    Step 1

    The pre-assembled basic profiles (including building protection mat and central support) are laid out on the roof and the central supports is simply unfolded. The hinge of the folding mechanism is fixed in the end position by applying slight pressure. Fastening to the roof is not necessary, which protects the building fabric and significantly reduces installation costs.

    Step 2

    The basic profiles are aligned on the roof and the ballast carriers are attached. The ballast can already be placed according to the ballast plan.

    Step 3

    The Q CELLS solar modules are only pushed into the central support and placed in the end clamp without having to be attached with a clamp.
    During this work step, the convenient cabling can be carried out using the optional cable clips.
    The solar module is lowered downwards into the end position.

     

    Step 4

    The end clamp plate is put on and screwed tight.
    This unique assembly design not only minimizes the installation time, but also reduces the mechanical stress on the solar modules thanks to the floating mounting.
    With the fixation of an end clamp, two adjacent modules are attached at the same time - another time saving.

     

    Setvariants of the mounting material set Q.Flat G5 for Q.Cells modules G5 / G6 / G7 /G8

     

    Set 1

    For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for foiled roofs

    Components

    • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat with aluminum lamination for foil roof

    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm

    • Q.Flat-G5 end clamp klemme pre-assembled

    Set 2

    For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for bitumen roofs

    Components

    • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat without aluminum lamination for bitumen roofs
    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm
    • Q.Flat-G5 end clamp pre-assembled

    Set 3

    For Q.Peak DUO-G5 and Q.Peak DUO-G7 with 120 half cells for foiled roofs

    Components

    • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat with aluminum lamination for foil roof
    • Q.Flat-G5 ballast carrier DUO (G6/G8), 1638mm
    • Q.Flat-G5 end clamp pre-assembled

    Set 4

    Für Q.Peak DUO-G5 und Q.Peak DUO-G7 mit 120 Halbzellen für bitumen roofs

    Components

    • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat without aluminum lamination for bitumen roofs
    • Q.Flat-G5 ballast carrier DUO (G4/G5/G7), 1638mm
    • Q.Flat-G5 end clamp pre-assembled

     

    Download

    PDF Logo  Download instruction for installation

     

     

     

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Q.Cells Montage Systeme

Several mounting systems are available from Q.Cells for different applications on roofs

  • Q.Mount for pitches roofs
  • Q.Cell G4
  • Q.Cell G5 for flatroofs

Only two general preparations are necessary for the detailled preparations for assembling the Q.Cells System G5. The assembly is done in just four steps with little effort

Preparation Step 1

1.1 Planning of the system with Q.Cells Rooftop Planner
1.2 Mounting plan for the solar modules
1.3 Connection Plan for the modules
1.4 Selection of the Inverter according to the project
1.5 Cable layout
1.6 Plan and design of the additional ballast

 

Preparation step 2

2.1 Prparing the documentation
2.2 Report of the structural design in consideration of the loads of winfd and snow
2.3 Profatibility calculation
2.4 Bill of material

 

Simple and easy mounting of Q.Cells G5 mounting system

The Q.Cell G5 System is easily erected on a suitable flat roof.

 

Step 1

The pre-assembled basic profiles (including building protection mat and central support) are laid out on the roof and the central supports is simply unfolded. The hinge of the folding mechanism is fixed in the end position by applying slight pressure. Fastening to the roof is not necessary, which protects the building fabric and significantly reduces installation costs.

Step 2

The basic profiles are aligned on the roof and the ballast carriers are attached. The ballast can already be placed according to the ballast plan.

Step 3

The Q CELLS solar modules are only pushed into the central support and placed in the end clamp without having to be attached with a clamp.
During this work step, the convenient cabling can be carried out using the optional cable clips.
The solar module is lowered downwards into the end position.

 

Step 4

The end clamp plate is put on and screwed tight.
This unique assembly design not only minimizes the installation time, but also reduces the mechanical stress on the solar modules thanks to the floating mounting.
With the fixation of an end clamp, two adjacent modules are attached at the same time - another time saving.

 

Setvariants of the mounting material set Q.Flat G5 for Q.Cells modules G5 / G6 / G7 /G8

 

Set 1

For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for foiled roofs

Components

  • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat with aluminum lamination for foil roof

  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm

  • Q.Flat-G5 end clamp klemme pre-assembled

Set 2

For Q.Peak DUO-G6 and Q.Peak DUO-G8 with 120 half cells for bitumen roofs

Components

  • Q.Flat-G5 basic profile DUO (G6 / G8) incl. building protection mat without aluminum lamination for bitumen roofs
  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1693mm
  • Q.Flat-G5 end clamp pre-assembled

Set 3

For Q.Peak DUO-G5 and Q.Peak DUO-G7 with 120 half cells for foiled roofs

Components

  • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat with aluminum lamination for foil roof
  • Q.Flat-G5 ballast carrier DUO (G6/G8), 1638mm
  • Q.Flat-G5 end clamp pre-assembled

Set 4

Für Q.Peak DUO-G5 und Q.Peak DUO-G7 mit 120 Halbzellen für bitumen roofs

Components

  • Q.Flat-G5 basic profile DUO (G4/G5/G7) incl. building protection mat without aluminum lamination for bitumen roofs
  • Q.Flat-G5 ballast carrier DUO (G4/G5/G7), 1638mm
  • Q.Flat-G5 end clamp pre-assembled

 

Download

PDF Logo  Download instruction for installation

 

 

 

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »