Victron Energy Phoenix Inverter 48/1600 230V Smart
Victron Energy Phoenix inverter 48/1600 smart 230V
The Phoenix 48/1600 convinces in many ways. Some data at a glance:
• Low battery alarm
• Threshold values for switching off and restarting at low battery voltage values.
• Dynamic shutdown: load-dependent shutdown threshold
• Output voltage: 210 - 245V
• Frequency: 50 Hz or 60 Hz
• Threshold value for ECO mode on / off and ECO mode sensor
• Alarm relay
• Input and output voltage, load and alarms
VE.Direct communication port
Since the 48/1600 can be easily connected to a computer or laptop, monitoring and configuration is child's play.
By installing a ring transformer, the reliability of the 48/1600 has increased again. The device is protected against both short circuits and overheating of any kind.
High switch-on power
This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools.
In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold value, the inverter remains switched on.
Remote on / off switch
A remote-controlled on / off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (left) of the two-pole plug can be connected to a battery positive pole or connection L (right) of the two-pole plug can be switched to the battery negative pole (or, for example, to the body of a vehicle).