Victron Energy MultiPlus 48/5000/70-100 230V VE.Bus

    **Free shipping** with code: Victron

    This device is also available in a 3000VA version for operation on 48Volt battery storage systems such as those compatible batteries.

    As it also has a lightning-fast 100A transfer switch in addition to the inverter and charger, it is an ideal inverter for mobile homes, boats or yachts and the grid-connected ​​uninterruptible power supply in the case of grid fluctuations or power outages. Also for use in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution.


    Essential performance features of the Multiplus 48/5000 / 70-100


    -   4000W continuous power and 10,000W peak power, for 48V battery voltage (e.g.Pylontech)
    -   Device combination of inverter with transfer switch and 70A battery charger
    -   supplies the purest 230V sinus voltage and a clean 50Hz frequency
    -   VE.Bus communication port provides extensive networking options.
    -   supports three-phase operation (3 identical units of the same model required)
    -   Multiplus devices can be switched in parallel
    -   2 AC outputs from Multiplus 3000 and larger. Devices can then be connected to the second output -   that only run when mains power is available
    -   PowerControl function enables working with limited generator power as well as limited shore or grid   
         power
    -   PowerAssist function enables “performance increase” of generators and shore connection support in
         case of need
    -   Can be used as a UPS solution for an uninterruptible power supply
    -   Can be used for grid-connected self-consumption systems that only draw power from the grid
         operator when the battery capacity is insufficient
    -   Three-phase operation possible with identical MultiPlus inverters

     

    Massive performance expansion possible

    Aside from being connected in parallel, three units of the same model can be configured for three-phase output.

    PowerControl - Working with limited generator power, limited shore or grid power

    The Victron Energy MultiPlus is a very powerful battery charger. Therefore it takes a lot of electricity from the generator or the shore power supply. The maximum mains or generator current to be drawn can be set with the Multi Control remote control panel. The MultiPlus then takes other connected AC loads into account and only uses the electricity that is “left over” for charging.

    PowerAssist - "performance increase" of generators and shore connection support

    With this function, the PowerControl principle takes on a new dimension. It enables the MultiPlus to support under-designed alternative sources. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery.

    BackUp system: alternating current even in the event of a power failure


    The MultiPlus can be used with non-grid-connected and grid-connected PV systems as well as with other alternative energy systems. Software is available to detect a power failure.


    Simple system configuration

    If settings need to be changed on a stand-alone device, this can be done in a matter of minutes using a DIP switch setting procedure. Three-phase systems connected in parallel can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.

    The device can be connected to up to two PV inverters. The power of an inverter should not exceed 3kW to maintain balance.

     

    Configuration.jpg

     

    On-site monitoring options and control


    Several options are available: battery monitor, multi control panel, Ve.Net Blue Power panel, color control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

    Remote monitoring and control

    Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus.

    Remote configuration

    If systems with a color control panel are connected, settings can be changed remotely.

     

    datasheet.pdf

    quick-installation.pdf

    Manual.pdf

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt.

    Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Victron Energy MultiPlus 48/5000/70-100 230V VE.Bus

**Free shipping** with code: Victron

This device is also available in a 3000VA version for operation on 48Volt battery storage systems such as those compatible batteries.

As it also has a lightning-fast 100A transfer switch in addition to the inverter and charger, it is an ideal inverter for mobile homes, boats or yachts and the grid-connected ​​uninterruptible power supply in the case of grid fluctuations or power outages. Also for use in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution.


Essential performance features of the Multiplus 48/5000 / 70-100


-   4000W continuous power and 10,000W peak power, for 48V battery voltage (e.g.Pylontech)
-   Device combination of inverter with transfer switch and 70A battery charger
-   supplies the purest 230V sinus voltage and a clean 50Hz frequency
-   VE.Bus communication port provides extensive networking options.
-   supports three-phase operation (3 identical units of the same model required)
-   Multiplus devices can be switched in parallel
-   2 AC outputs from Multiplus 3000 and larger. Devices can then be connected to the second output -   that only run when mains power is available
-   PowerControl function enables working with limited generator power as well as limited shore or grid   
     power
-   PowerAssist function enables “performance increase” of generators and shore connection support in
     case of need
-   Can be used as a UPS solution for an uninterruptible power supply
-   Can be used for grid-connected self-consumption systems that only draw power from the grid
     operator when the battery capacity is insufficient
-   Three-phase operation possible with identical MultiPlus inverters

 

Massive performance expansion possible

Aside from being connected in parallel, three units of the same model can be configured for three-phase output.

PowerControl - Working with limited generator power, limited shore or grid power

The Victron Energy MultiPlus is a very powerful battery charger. Therefore it takes a lot of electricity from the generator or the shore power supply. The maximum mains or generator current to be drawn can be set with the Multi Control remote control panel. The MultiPlus then takes other connected AC loads into account and only uses the electricity that is “left over” for charging.

PowerAssist - "performance increase" of generators and shore connection support

With this function, the PowerControl principle takes on a new dimension. It enables the MultiPlus to support under-designed alternative sources. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery.

BackUp system: alternating current even in the event of a power failure


The MultiPlus can be used with non-grid-connected and grid-connected PV systems as well as with other alternative energy systems. Software is available to detect a power failure.


Simple system configuration

If settings need to be changed on a stand-alone device, this can be done in a matter of minutes using a DIP switch setting procedure. Three-phase systems connected in parallel can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.

The device can be connected to up to two PV inverters. The power of an inverter should not exceed 3kW to maintain balance.

 

Configuration.jpg

 

On-site monitoring options and control


Several options are available: battery monitor, multi control panel, Ve.Net Blue Power panel, color control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote monitoring and control

Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus.

Remote configuration

If systems with a color control panel are connected, settings can be changed remotely.

 

datasheet.pdf

quick-installation.pdf

Manual.pdf

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Victron Energy MultiPlus 48/5000/70-100 230V VE.Bus

The Victron Multiplus 48/5000 / 70-100 (MPN PMP485021010) is a device combination of a 48 volt 4000 watt sine wave inverter and battery charger. The firmly integrated battery charger has a remarkable 70Amper output, which means that even large batteries c
MultiPlus 48/5000/70-100 230V VE.Bus
MultiPlus 48/5000/70-100 230V VE.Bus €1.522,35
Delivery time 1-3 days free shipping with code: Victron
1-3 days free shipping with code: Victron You have got: counting... hours
* Excl. tax Excl. Shipping costs

    Victron Energy MultiPlus 48/5000/70-100 230V VE.Bus

    **Free shipping** with code: Victron

    This device is also available in a 3000VA version for operation on 48Volt battery storage systems such as those compatible batteries.

    As it also has a lightning-fast 100A transfer switch in addition to the inverter and charger, it is an ideal inverter for mobile homes, boats or yachts and the grid-connected ​​uninterruptible power supply in the case of grid fluctuations or power outages. Also for use in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution.


    Essential performance features of the Multiplus 48/5000 / 70-100


    -   4000W continuous power and 10,000W peak power, for 48V battery voltage (e.g.Pylontech)
    -   Device combination of inverter with transfer switch and 70A battery charger
    -   supplies the purest 230V sinus voltage and a clean 50Hz frequency
    -   VE.Bus communication port provides extensive networking options.
    -   supports three-phase operation (3 identical units of the same model required)
    -   Multiplus devices can be switched in parallel
    -   2 AC outputs from Multiplus 3000 and larger. Devices can then be connected to the second output -   that only run when mains power is available
    -   PowerControl function enables working with limited generator power as well as limited shore or grid   
         power
    -   PowerAssist function enables “performance increase” of generators and shore connection support in
         case of need
    -   Can be used as a UPS solution for an uninterruptible power supply
    -   Can be used for grid-connected self-consumption systems that only draw power from the grid
         operator when the battery capacity is insufficient
    -   Three-phase operation possible with identical MultiPlus inverters

     

    Massive performance expansion possible

    Aside from being connected in parallel, three units of the same model can be configured for three-phase output.

    PowerControl - Working with limited generator power, limited shore or grid power

    The Victron Energy MultiPlus is a very powerful battery charger. Therefore it takes a lot of electricity from the generator or the shore power supply. The maximum mains or generator current to be drawn can be set with the Multi Control remote control panel. The MultiPlus then takes other connected AC loads into account and only uses the electricity that is “left over” for charging.

    PowerAssist - "performance increase" of generators and shore connection support

    With this function, the PowerControl principle takes on a new dimension. It enables the MultiPlus to support under-designed alternative sources. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery.

    BackUp system: alternating current even in the event of a power failure


    The MultiPlus can be used with non-grid-connected and grid-connected PV systems as well as with other alternative energy systems. Software is available to detect a power failure.


    Simple system configuration

    If settings need to be changed on a stand-alone device, this can be done in a matter of minutes using a DIP switch setting procedure. Three-phase systems connected in parallel can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.

    The device can be connected to up to two PV inverters. The power of an inverter should not exceed 3kW to maintain balance.

     

    Configuration.jpg

     

    On-site monitoring options and control


    Several options are available: battery monitor, multi control panel, Ve.Net Blue Power panel, color control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

    Remote monitoring and control

    Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus.

    Remote configuration

    If systems with a color control panel are connected, settings can be changed remotely.

     

    datasheet.pdf

    quick-installation.pdf

    Manual.pdf

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Victron Energy MultiPlus 48/5000/70-100 230V VE.Bus

**Free shipping** with code: Victron

This device is also available in a 3000VA version for operation on 48Volt battery storage systems such as those compatible batteries.

As it also has a lightning-fast 100A transfer switch in addition to the inverter and charger, it is an ideal inverter for mobile homes, boats or yachts and the grid-connected ​​uninterruptible power supply in the case of grid fluctuations or power outages. Also for use in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution.


Essential performance features of the Multiplus 48/5000 / 70-100


-   4000W continuous power and 10,000W peak power, for 48V battery voltage (e.g.Pylontech)
-   Device combination of inverter with transfer switch and 70A battery charger
-   supplies the purest 230V sinus voltage and a clean 50Hz frequency
-   VE.Bus communication port provides extensive networking options.
-   supports three-phase operation (3 identical units of the same model required)
-   Multiplus devices can be switched in parallel
-   2 AC outputs from Multiplus 3000 and larger. Devices can then be connected to the second output -   that only run when mains power is available
-   PowerControl function enables working with limited generator power as well as limited shore or grid   
     power
-   PowerAssist function enables “performance increase” of generators and shore connection support in
     case of need
-   Can be used as a UPS solution for an uninterruptible power supply
-   Can be used for grid-connected self-consumption systems that only draw power from the grid
     operator when the battery capacity is insufficient
-   Three-phase operation possible with identical MultiPlus inverters

 

Massive performance expansion possible

Aside from being connected in parallel, three units of the same model can be configured for three-phase output.

PowerControl - Working with limited generator power, limited shore or grid power

The Victron Energy MultiPlus is a very powerful battery charger. Therefore it takes a lot of electricity from the generator or the shore power supply. The maximum mains or generator current to be drawn can be set with the Multi Control remote control panel. The MultiPlus then takes other connected AC loads into account and only uses the electricity that is “left over” for charging.

PowerAssist - "performance increase" of generators and shore connection support

With this function, the PowerControl principle takes on a new dimension. It enables the MultiPlus to support under-designed alternative sources. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery.

BackUp system: alternating current even in the event of a power failure


The MultiPlus can be used with non-grid-connected and grid-connected PV systems as well as with other alternative energy systems. Software is available to detect a power failure.


Simple system configuration

If settings need to be changed on a stand-alone device, this can be done in a matter of minutes using a DIP switch setting procedure. Three-phase systems connected in parallel can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.

The device can be connected to up to two PV inverters. The power of an inverter should not exceed 3kW to maintain balance.

 

Configuration.jpg

 

On-site monitoring options and control


Several options are available: battery monitor, multi control panel, Ve.Net Blue Power panel, color control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote monitoring and control

Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus.

Remote configuration

If systems with a color control panel are connected, settings can be changed remotely.

 

datasheet.pdf

quick-installation.pdf

Manual.pdf

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »