Image 1 / 1

    GoodWe - GW10K-ET+

    The new three-phase ET hybrid inverter with an output of 10 kW allows flexible compatibility with several lithium battery systems on the market thanks to the wide battery voltage range from 180V to 600V. With the GW10K-ET+, the incoming PV generator power can be up to 130% above the nominal power, which leads to a better energy yield at very low or very high temperatures.

    In the event of a power failure, the built-in emergency power function (UPS) enables switching within 10 milliseconds to guarantee an uninterrupted power supply for connected consumers. The inverter also has an open battery management interface, which meets the requirements of some energy suppliers.

    The fanless design not only ensures a long service life of the non-stop working inverter, but also creates a quiet operating atmosphere for everyday use.

    The ET Plus series replaces the old ET series.

     

    Product properties

    • Mains connection: 3 phases
    • AC Power: 10.0kVA 10.0 kW emergency power output via separate output
    • 10,0 kW Notstrom Leistung über separaten Ausgang 
    • MPP Tracker: 2
    • String connections per MPPT: 1
    • Battery connection for high-voltage battery (BYD, GoodWe)
    • RS485, WLAN (optional LAN)
    • Potential-free contact available (programmable via PV-Master APP) (SG-Ready)
    • Push-in terminals for the communication interfaces simplify installation
    • 3-phase smart meter included
    • Dimensions: 516 x 415 x 180mm (HxWxD)
    • Protection class: IP66
    • Weight: 24kg

    Downloads 

    PDF LogoGoodWe GW10K-ET data sheet

    PDF LogoGoodWe ET Plus Series User Manual EN

    PDF LogoGoodWe ET Plus Series Parallel Connection Manual EN

    PDF LogoGoodWe ET Plus Series Quick Installation Guide

    PDF LogoGoodWe GW10K-ET certificate VDE AR-N 4105:2018

    PDF LogoGoodWe GW10K-ET TOR Generator Type A Certificate

    PDF LogoGoodWe Battery Options

    Videos

    GoodWe PV Master APP

     
    GoodWe ET Serie
     
    GoodWe ET Serie Installation und Konfiguration mit BYD

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt.

    Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

GoodWe - GW10K-ET+

The new three-phase ET hybrid inverter with an output of 10 kW allows flexible compatibility with several lithium battery systems on the market thanks to the wide battery voltage range from 180V to 600V. With the GW10K-ET+, the incoming PV generator power can be up to 130% above the nominal power, which leads to a better energy yield at very low or very high temperatures.

In the event of a power failure, the built-in emergency power function (UPS) enables switching within 10 milliseconds to guarantee an uninterrupted power supply for connected consumers. The inverter also has an open battery management interface, which meets the requirements of some energy suppliers.

The fanless design not only ensures a long service life of the non-stop working inverter, but also creates a quiet operating atmosphere for everyday use.

The ET Plus series replaces the old ET series.

 

Product properties

  • Mains connection: 3 phases
  • AC Power: 10.0kVA 10.0 kW emergency power output via separate output
  • 10,0 kW Notstrom Leistung über separaten Ausgang 
  • MPP Tracker: 2
  • String connections per MPPT: 1
  • Battery connection for high-voltage battery (BYD, GoodWe)
  • RS485, WLAN (optional LAN)
  • Potential-free contact available (programmable via PV-Master APP) (SG-Ready)
  • Push-in terminals for the communication interfaces simplify installation
  • 3-phase smart meter included
  • Dimensions: 516 x 415 x 180mm (HxWxD)
  • Protection class: IP66
  • Weight: 24kg

Downloads 

PDF LogoGoodWe GW10K-ET data sheet

PDF LogoGoodWe ET Plus Series User Manual EN

PDF LogoGoodWe ET Plus Series Parallel Connection Manual EN

PDF LogoGoodWe ET Plus Series Quick Installation Guide

PDF LogoGoodWe GW10K-ET certificate VDE AR-N 4105:2018

PDF LogoGoodWe GW10K-ET TOR Generator Type A Certificate

PDF LogoGoodWe Battery Options

Videos

GoodWe PV Master APP

 
GoodWe ET Serie
 
GoodWe ET Serie Installation und Konfiguration mit BYD
Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

GoodWe GW10K-ET PLUS+ (+DC-SWITCH/WIFI/3P-METER/BACKUP) three-phase hybrid inverter with DC switch

The three-phase hybrid inverter has a three-phase emergency power output with three-phase AC power. Together with the high-voltage battery connection and 2 independent MPP trackers, the inverter leaves nothing to be desired. A smart meter is included.
GW10K-ET PLUS+ (+DC-SWITCH/WIFI/3P-METER/BACKUP) three-phase hybrid inverter with DC switch
GW10K-ET PLUS+ (+DC-SWITCH/WIFI/3P-METER/BACKUP) three-phase hybrid inverter with DC switch €1.996,00
Delivery time according to supplier early June, 2022 - order in advance
according to supplier early June, 2022 - order in advance You have got: counting... hours
+ -
Add to cart
* Excl. tax Excl. Shipping costs
Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

    GoodWe - GW10K-ET+

    The new three-phase ET hybrid inverter with an output of 10 kW allows flexible compatibility with several lithium battery systems on the market thanks to the wide battery voltage range from 180V to 600V. With the GW10K-ET+, the incoming PV generator power can be up to 130% above the nominal power, which leads to a better energy yield at very low or very high temperatures.

    In the event of a power failure, the built-in emergency power function (UPS) enables switching within 10 milliseconds to guarantee an uninterrupted power supply for connected consumers. The inverter also has an open battery management interface, which meets the requirements of some energy suppliers.

    The fanless design not only ensures a long service life of the non-stop working inverter, but also creates a quiet operating atmosphere for everyday use.

    The ET Plus series replaces the old ET series.

     

    Product properties

    • Mains connection: 3 phases
    • AC Power: 10.0kVA 10.0 kW emergency power output via separate output
    • 10,0 kW Notstrom Leistung über separaten Ausgang 
    • MPP Tracker: 2
    • String connections per MPPT: 1
    • Battery connection for high-voltage battery (BYD, GoodWe)
    • RS485, WLAN (optional LAN)
    • Potential-free contact available (programmable via PV-Master APP) (SG-Ready)
    • Push-in terminals for the communication interfaces simplify installation
    • 3-phase smart meter included
    • Dimensions: 516 x 415 x 180mm (HxWxD)
    • Protection class: IP66
    • Weight: 24kg

    Downloads 

    PDF LogoGoodWe GW10K-ET data sheet

    PDF LogoGoodWe ET Plus Series User Manual EN

    PDF LogoGoodWe ET Plus Series Parallel Connection Manual EN

    PDF LogoGoodWe ET Plus Series Quick Installation Guide

    PDF LogoGoodWe GW10K-ET certificate VDE AR-N 4105:2018

    PDF LogoGoodWe GW10K-ET TOR Generator Type A Certificate

    PDF LogoGoodWe Battery Options

    Videos

    GoodWe PV Master APP

     
    GoodWe ET Serie
     
    GoodWe ET Serie Installation und Konfiguration mit BYD
    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

GoodWe - GW10K-ET+

The new three-phase ET hybrid inverter with an output of 10 kW allows flexible compatibility with several lithium battery systems on the market thanks to the wide battery voltage range from 180V to 600V. With the GW10K-ET+, the incoming PV generator power can be up to 130% above the nominal power, which leads to a better energy yield at very low or very high temperatures.

In the event of a power failure, the built-in emergency power function (UPS) enables switching within 10 milliseconds to guarantee an uninterrupted power supply for connected consumers. The inverter also has an open battery management interface, which meets the requirements of some energy suppliers.

The fanless design not only ensures a long service life of the non-stop working inverter, but also creates a quiet operating atmosphere for everyday use.

The ET Plus series replaces the old ET series.

 

Product properties

  • Mains connection: 3 phases
  • AC Power: 10.0kVA 10.0 kW emergency power output via separate output
  • 10,0 kW Notstrom Leistung über separaten Ausgang 
  • MPP Tracker: 2
  • String connections per MPPT: 1
  • Battery connection for high-voltage battery (BYD, GoodWe)
  • RS485, WLAN (optional LAN)
  • Potential-free contact available (programmable via PV-Master APP) (SG-Ready)
  • Push-in terminals for the communication interfaces simplify installation
  • 3-phase smart meter included
  • Dimensions: 516 x 415 x 180mm (HxWxD)
  • Protection class: IP66
  • Weight: 24kg

Downloads 

PDF LogoGoodWe GW10K-ET data sheet

PDF LogoGoodWe ET Plus Series User Manual EN

PDF LogoGoodWe ET Plus Series Parallel Connection Manual EN

PDF LogoGoodWe ET Plus Series Quick Installation Guide

PDF LogoGoodWe GW10K-ET certificate VDE AR-N 4105:2018

PDF LogoGoodWe GW10K-ET TOR Generator Type A Certificate

PDF LogoGoodWe Battery Options

Videos

GoodWe PV Master APP

 
GoodWe ET Serie
 
GoodWe ET Serie Installation und Konfiguration mit BYD
Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »