Image 1 / 1

    Product Highlights

    • 100A output for up to 5kW of charging
    • Compatible with 24, 36 and 48VDC battery banks
    • Integrated ground fault protection
    • System configures quickly with smart programming wizards (MATE3s required)
    • 300VDC open-circuit voltage limit enables 2-string configuration that minimizes BOS
    The FLEXmax 100 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power.

    The advanced FM100 MPPT algorithm offers increased energy harvest from the PV array than other MPPT controllers. The FLEXmax 100 delivers both higher voltage and higher power, offering improved flexibility and performance.

    OutBack network communications and OPTICS RE compatibility allows the FLEXmax 100 to be remotely programmed, monitored and controlled via any internet connected device providing unrivalled system integration.

    The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.

    NOTICE: The PNL-GFDI-80 series ground fault breakers that are included in many prewired load centers and FP systems are NOT rated for use on circuits shared with an FM100-300VDC! The FM100-300VDC charge controller is equipped with an internal ground-fault protection device and simply requires 300-VDC rated overcurrent protection on its input and output circuits. The PNL-100/125-300VDC series breakers are recommended for the battery side and the PNL-40/60/80-300VDC series breakers are recommended for the PV array side. Due to the different voltage ratings, OutBack Power does not recommend mixing the FM100-300VDC with the FM60 or FM80-150VDC controllers on the same battery bank. Be sure to thoroughly review installation instructions when installing OutBack Power equipment.

    https://cdn.webshopapp.com/shops/264724/files/212913740/pdf-klein.png

    Datasheet:

     

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt.

    Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Product Highlights

  • 100A output for up to 5kW of charging
  • Compatible with 24, 36 and 48VDC battery banks
  • Integrated ground fault protection
  • System configures quickly with smart programming wizards (MATE3s required)
  • 300VDC open-circuit voltage limit enables 2-string configuration that minimizes BOS
The FLEXmax 100 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power.

The advanced FM100 MPPT algorithm offers increased energy harvest from the PV array than other MPPT controllers. The FLEXmax 100 delivers both higher voltage and higher power, offering improved flexibility and performance.

OutBack network communications and OPTICS RE compatibility allows the FLEXmax 100 to be remotely programmed, monitored and controlled via any internet connected device providing unrivalled system integration.

The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.

NOTICE: The PNL-GFDI-80 series ground fault breakers that are included in many prewired load centers and FP systems are NOT rated for use on circuits shared with an FM100-300VDC! The FM100-300VDC charge controller is equipped with an internal ground-fault protection device and simply requires 300-VDC rated overcurrent protection on its input and output circuits. The PNL-100/125-300VDC series breakers are recommended for the battery side and the PNL-40/60/80-300VDC series breakers are recommended for the PV array side. Due to the different voltage ratings, OutBack Power does not recommend mixing the FM100-300VDC with the FM60 or FM80-150VDC controllers on the same battery bank. Be sure to thoroughly review installation instructions when installing OutBack Power equipment.

https://cdn.webshopapp.com/shops/264724/files/212913740/pdf-klein.png

Datasheet:

 

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Outback Power FM100-300Vdc FLEXmax Series MPPT Charge Controller

100A output for up to 5kW of charging; Compatible with 24, 36 and 48VDC battery banks ; Up to 99% efficiency
FM100-300Vdc FLEXmax Series MPPT Charge Controller
FM100-300Vdc FLEXmax Series MPPT Charge Controller €948,00
Delivery time 1-3 days
1-3 days You have got: counting... hours
* Excl. tax Excl. Shipping costs

    Product Highlights

    • 100A output for up to 5kW of charging
    • Compatible with 24, 36 and 48VDC battery banks
    • Integrated ground fault protection
    • System configures quickly with smart programming wizards (MATE3s required)
    • 300VDC open-circuit voltage limit enables 2-string configuration that minimizes BOS
    The FLEXmax 100 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power.

    The advanced FM100 MPPT algorithm offers increased energy harvest from the PV array than other MPPT controllers. The FLEXmax 100 delivers both higher voltage and higher power, offering improved flexibility and performance.

    OutBack network communications and OPTICS RE compatibility allows the FLEXmax 100 to be remotely programmed, monitored and controlled via any internet connected device providing unrivalled system integration.

    The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.

    NOTICE: The PNL-GFDI-80 series ground fault breakers that are included in many prewired load centers and FP systems are NOT rated for use on circuits shared with an FM100-300VDC! The FM100-300VDC charge controller is equipped with an internal ground-fault protection device and simply requires 300-VDC rated overcurrent protection on its input and output circuits. The PNL-100/125-300VDC series breakers are recommended for the battery side and the PNL-40/60/80-300VDC series breakers are recommended for the PV array side. Due to the different voltage ratings, OutBack Power does not recommend mixing the FM100-300VDC with the FM60 or FM80-150VDC controllers on the same battery bank. Be sure to thoroughly review installation instructions when installing OutBack Power equipment.

    https://cdn.webshopapp.com/shops/264724/files/212913740/pdf-klein.png

    Datasheet:

     

     

    Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.

Product Highlights

  • 100A output for up to 5kW of charging
  • Compatible with 24, 36 and 48VDC battery banks
  • Integrated ground fault protection
  • System configures quickly with smart programming wizards (MATE3s required)
  • 300VDC open-circuit voltage limit enables 2-string configuration that minimizes BOS
The FLEXmax 100 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power.

The advanced FM100 MPPT algorithm offers increased energy harvest from the PV array than other MPPT controllers. The FLEXmax 100 delivers both higher voltage and higher power, offering improved flexibility and performance.

OutBack network communications and OPTICS RE compatibility allows the FLEXmax 100 to be remotely programmed, monitored and controlled via any internet connected device providing unrivalled system integration.

The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.

NOTICE: The PNL-GFDI-80 series ground fault breakers that are included in many prewired load centers and FP systems are NOT rated for use on circuits shared with an FM100-300VDC! The FM100-300VDC charge controller is equipped with an internal ground-fault protection device and simply requires 300-VDC rated overcurrent protection on its input and output circuits. The PNL-100/125-300VDC series breakers are recommended for the battery side and the PNL-40/60/80-300VDC series breakers are recommended for the PV array side. Due to the different voltage ratings, OutBack Power does not recommend mixing the FM100-300VDC with the FM60 or FM80-150VDC controllers on the same battery bank. Be sure to thoroughly review installation instructions when installing OutBack Power equipment.

https://cdn.webshopapp.com/shops/264724/files/212913740/pdf-klein.png

Datasheet:

 

 

Versand und Fracht Artikel mit höherem Gesamtgewicht (Solarmodule), Übermaßen und Gefahrgut (Batterien) müssen per Spedition versendet werden. Das ist bei durch die unterschiedlichen Gewichte und Lieferorte manchmal nicht korrekt dargestellt. Articles with higher total or size (Solar Modules) weight, excess quantities and dangerous goods usually have to be shipped by a freight carrier. Somtimes this prices are shown not correctly. In such cases we will inform you at short notice about the real shipping costs. You are also welcome to commission your own forwarder with the pickup. For most countries outside Europe, the freight price - usually for air freight - is displayed directly. If that does not apply to your country, we will gladly offer you the freight at short notice and at a favorable price. This also applies to articles with higher total weight and oversizes. You are also welcome to commission your own forwarder with the pickup. You may also be charged for customs and import fees.
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »