Victron Energy SmartSolar MPPT 250/60
Super Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar panels, the MPPT (Maximum Power Point Tracking) technology ensures that all of the available power is rinsed out of your solar panels and harvested for storage. This is most noticeable during clouded skies and changing light intensities. Energy harvest will improve by up to 30% compared to PWM charge controllers.
Extended Battery Life
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which the Victron charge controller SmartSolar disconnects a load to prevent excessive drain on the batteries.
With the BatteryLife feature, the Victron Energy charge controller will attempt a full recharge every day. If it can't - for example because of poor weather - it raises the disconnect voltage daily, until it's successful. This maintains the health and extends the life of the battery.
Remote monitoring and control
You can remotely control and monitor the extensive functions of your SmartSolar MMPT charger with integrated Bluetooth by coupling it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM) via a GX device, you have full access to your MPPT anytime, anywhere. Both VictronConnect and VRM are available free of charge. For remote installations - even if there is no internet connection nearby - you may be able to monitor your MPPT by connecting it to the GlobalLink 520.
TR: one positive and one negative screw terminal
MC4: - 3 pairs of parallel MC4 connectors
without designation: no additional relay, no remote on/off and also no display connection on the housing, screw terminals
SmartSolar MPPT 250/60 MC4: contains three parallel MC4 connectors.
SmartSolar MPPT 250/60-Tr: contains a positive and negative screw clamp.