Victron Energy BatteryProtect 48V-100A
The task of the Victron Battery Protect battery monitor is the disconnection of the battery from non essential loads so that the battery is not completely discharged and protected from damage. In addition, there is also enough energy available to start the engine.
The device from Victron Energy is not designed for reverse currents from charging sources.
Highlights of the Victron Battery Protect BP 48-100
easy programming - can be set to engage / disengage at several voltages
7 segment display - you will immediately see which settings have been selected
li-ion battery mode - the Victron Battery Protect can be controlled by VE.Bus BMS
extremely low current consumption - important for lithium-ion batteries, especially after low voltage shutdown
over voltage protection - load is disconnected when the DC voltage exceeds 64V to prevent damage to sensitive loads due to over voltage
ignition proof - MOSFET switches (no relays), therefore no sparks
Downloads - Victron Battery Monitor 48V-100A
Datasheet (PDF, 205 KB)